Cut & Paste

October 27, 2015Restoration Projects1960's, Dressing Table, Hayson, Mid Century, TeakJohnny

Over the weekend I carried out a few minor repairs on a great Hayson teak/veneer dressing table. A common issue often seen with the majority of teak furniture dating from the 1960’s can be chips/damage to the thin veneer. They are unsightly, can run further if caught whilst cleaning and also devalue your beautiful piece of furniture.

1960's furniture repair — Sitting precariously!

For example, on the left hand side of the dresser, towards the bottom edge we are missing a 15mm x 20mm piece of veneer, along with a few other smaller nicks to the right. Obviously it’s not a major issue, it’s just there, and you know about it, and you hate how it’s damaged in that area, and how it catches your eye every time you walk past – much like a dent to your beloved car!

So how do we fix? We simply glue in another piece of teak veneer, and try to match it as best we can!

Teak Veneer Repairs — Left – little to dark / Right – better

The teak veneer used above I salvaged from a broken record player I stumbled across at the local tip one day. The piece to the left is a little to dark, and whilst the piece on the right is better – the grain however is a little wider and not quite as tight, but it will have to do!

1960's Sideboard Drawers Repair — Glueing / Taping / Finished.

So after squaring the edges, and meticulously peeling off a piece from the ‘donor’ it was trimmed, glued and clamped into place, along with a few smaller pieces (under the tape). Once the glue was dry I removed the clamp and I must say I was a little surprised at how much darker it looks now on its own compared to the side by side picture. A light sand with some 800 grit wet & dry, and a few coats of furniture polish (oil) and we’re done!

Now although the colour doesn’t quite match 100%, the repair is complete! The veneer’s are level, and firmly glued down, with no chance of any further damage occurring. Remember, we’re not trying to hide the repair or signs of it’s previous life – we’re ensuring the piece is in great, functional condition, ready for the next 50 years of use!

Kafka Lounge – Part 4 – Completed!

October 11, 2015Restoration Projects1950's, Kafka, Lounge, Mid Century, RestorationJohnny

Sorry for the length of time between posts! Unfortunately time got a little short before my wedding, and thus the updates on the Kafka lounge have had to wait, however I was able to complete the freshen up before the big day, and use it exactly how I had planned!

I left you with the hand rests sanded, and ready for the finish to be applied. As they are firmly attached, removing wasn’t an option, so to prevent any of the finish getting on that majestic coloured vinyl, good old masking tape was used. Fiddly, however once on I didn’t have to be too concerned about any spillage or runs staining the vinyl!

Preping for the finish! — Time consuming!

Once done, the finish was ready to be applied. In my very first post about the lounge I mentioned the different timbers used and how matching hand rests to the darker teak legs may be a little difficult. To try and darken the coachwood (hand rests) I experimented with a few different stains, and applications, and eventually settled on a mixture of 10:1 – being 10 parts danish oil to 1 part teak stain. Mixed together and applied with a soft, cotton cloth I was extremely happy with the results after 4 coats were applied. It really highlighted that grain in the left hand side hand rest!

With all the timber work now complete, all that was left was to fit the cheesecloth to the underside to cover up the ‘internals’, refit the timber legs and give the lounge a quick wipe over once more with the vinyl conditioner!

Underside cover for the 1950's lounge — Neaten things up!

So how did it turn out…………? Guess you’ll have to wait until next time to see! 🙂

Kafka Lounge – Part 3

August 26, 2015Restoration Projects1950's, Kafka, Lounge, Mid Century, RestorationJohnny

Part 3 brings us the wood.

First off, the solid teak legs.

Danish Oiled Teak 1950's Legs — Before, During & After!

All pretty self explanatory! From the top left we have a comparison between a sanded teak leg to one with the original finish which I’ll use a guide for when it comes ‘colour matching’. Working clockwise we then have all 4 legs sanded. Due to only wanting to remove the original finish I didn’t have to go to harsh with the sandpaper. 240 grit was plenty enough to remove it, and then finish with a 400 grit which gave a great, super smooth finish.

Bottom left shows all 4 legs in my jig to apply the danish oil finish. This was after 1 coat, notice the matt finish, and how it will change to a higher gloss/sheen when more coats are applied. Also of note are the 2 distinctive shades of colour between the legs, with the longer legs (front) being darker. Bottom right shows the completed legs with 4 coats of Danish Oil applied. Very happy with the end result!

Retro Timber Coachwood Hand Rests — Ready for sanding.

With the legs now done and dusted, my attention turned indoors, and to the well worn hand rests. To remove what was left of the original shellac finish I used a cabinet style scraper. What you see above is the completed works.

With a steady hand and some 240 grit sandpaper I got to work being ever so careful to avoid the vinyl upholstery. An hour later and a few sheets less of sandpaper and I was done. I was super impressed with the grain on the left side hand rest. I couldn’t see it before through the shellac, but it’s looking like there’s a bit of fiddleback in there. Will be great to see how it shows up under the Danish Oil! A quick hit with some 400 grit to wrap things up and we’re just about ready to apply the new finish.

Kafka ‘Freshen Up’ – Part 2

August 17, 2015Restoration Projects1950's, Australian, Kafka, Lounge, Mid Century, RestorationJohnny

I’ll be moving reasonably quickly through the freshen up of the Kafka lounge, largely due to a major deadline looming (read wedding) in the next few weeks – I’m also a little ahead of where I’m posting about.

Repairing Mid Century Furniture — Tape & Vinyl Glue

So following on from the original clean, removing of stray paint and applying a conditioner to the vinyl we have now landed at the scratches and small tears to the original vinyl upholstery. The main one of note, is a small tear, approximately 15-20mm long x 2 – 3mm wide in the centre of the main cushion. What to do?

I did investigate the possibility of recovering the cushion, however to match the original colour and pattern of the vinyl was proving to be a difficult task, and to be honest probably more trouble than it was worth, so the decision was made to leave it as it, and just tidy up a few of the smaller nicks and scratches with some specific vinyl adhesive to stop them catching and going any further.

Once the adhesive was dry, I then moved onto removing the angular, tapered teak legs in preparation for refinishing. The legs were simply screwed into a threaded nut that ‘bites’ into the other side of the timber. Simple, yet effective.

With the legs removed I was faced with the dirty, well worn calico/cheesecloth cover to the underside of the lounge.

Killer 50's Retro Chair — Calico or Cheesecloth?

I had always been in two minds in regards to replacing it. Looking back now I wonder how that thought could of ever entered my mind! Being a little tired made for lite work in removing the bottom cover. With 60 years of dust settled on it, I also discovered that originally it looks like it was light blue in colour, perhaps to blend just that little better. With the replacement I don’t think I’ll worry with the colour, just a nice clean piece of calico/cheesecloth to cover the ‘internals’ of the lounge, which by the way are in great shape for their age! No sagging springs or visible damage. Score.

With the underside of the lounge now accessible, and a heap of old rusty staples looking at me square in the face (used to fix the calico cover) I got to work removing them all, one at a time. Not really necessary, and a lot of guys would just cover over the top, however my slightly obsessive compulsive nature wouldn’t let me do it. Much better in the long run I think.

Quick thing to note – It appears the slight angle on the front legs were achieved by using a small piece of masonite under the rear side of the front leg(s). Interesting.

Kafka ‘Freshen Up’ – Part 1

August 10, 2015Restoration ProjectsAustralia, Kafka, Lounge, Mid CenturyJohnny

So I’m getting married in just over a month, and my fiancee and I decided that – weather permitting, we would use this great teal/turquoise coloured 2 seater lounge designed and manufactured by Kafka as our ‘love seat’.

Being used solidly for the past 60 years has taken its toll (although small) on the lounge which is a little tired. Whats that mean? Well with time ticking away it’s time for a restoration, or perhaps more fitting, a ‘freshen up’.

Kafka Lounge Mid Century — No, thats not a shadow!

First of all comes a good vacuum, especially down behind the attached seat cushion. Although a little tight to get into, plenty of dirt and dust was removed. Then, and perhaps the most notable part – washing the vinyl covering. Nothing other than some warm water, soap, and a soft sponge produced the amazing result you see in the top 2 images (left half after – right half before).

It’s crazy to think that that much dirt, grease and grime was there. The other side affect from giving the vinyl a thorough clean, was the overall feel. Before washing, the vinyl was hard to touch and stiff, yet after the wash it felt super soft and nice to touch again. It definitely revitalised the vinyl, and with a vinyl conditioner applied once dry, it will only continue to get better!

Next was the stray white paint brush mark! With the vinyl having a very fine textured pattern, I didn’t want to use anything abrasive to try and remove the paint in the grooves, so I ended up using a super fine sewing pin to very gentle pick the white paint out of the grooves. Super time consuming, however it worked quite well!

As you can see from the above picture, the timber hand rests have seen better days. The tinted shellac has started to flake off in places (like most shellac finished from the era) while the angular legs are looking a little tired.

The combination of timbers here are interesting. The hand supports are manufactured out of coachwood, whilst the legs are teak. Coachwood is naturally a lighter coloured timber, hence why a darker/tinted shellac was used as the finish – to try and match the darker, solid teak legs. May pose some difficulties down the track but we’ll cross that bridge in time!

More updates next week!

Amazing.

July 30, 2015General1950's, Bed, Melbourne, Mid Century, RosandoJohnny

Every once in a while you’ll come across a piece of furniture that completely blows your mind. For me, this happened today whilst browsing an Australian Mid Century group on Facebook.

In architecture, you’d call the lines and design adorning the top of the front and rear bedheads – a butterfly roof, popularised in the post war period and so common to many mid century designed homes.

Rosando Bro's Mid Century — Beautiful lines!

Here they’ve applied the same design and principals to what otherwise is normally rectangular in shape (and boring!) and created something amazing and beautiful.

1950's Bed frame - Australian — Design & practicality.

Apparently the new owners came into possession of the bed after purchasing a mid century modern home in Melbourne, and believe the manufacturer to be the Rosando Brothers. After looking through some other images of their work here, there definitely appears to be a strong resemblance in both style and design when compared to some of their other known work. I wish the new owners all the best with their amazing find!

Amazing Kafka 2 Seater Lounge

July 26, 2015Restoration ProjectsLounge, Mid Century, Paul KafkaJohnny

Check this out.

Mid Century Lounge — 2 Seater Kafka Lounge

I was lucky enough to come across this 2 seater lounge whilst on holidays. Looking quite familiar and with that amazing teal coloured vinyl I made it mine as quickly as I could!

The lounge appears to of been manufactured by Paul Kafka (I have done a post on him recently here) and although there are no visible maker’s labels or stamp, the styling is quite distinct and easy to identify with the angled legs, flared armrests, timber inserts (hand rests) and buttoned/stitched rear back support.

Overall the condition of the lounge is reasonable to good. There are a few nicks and one minor tear to the vinyl (also needs a thorough clean), the timber hand rests and legs need refinishing and the cheesecloth cover to the underside needs replacing and over the next few weeks I will be completing each as required.

With plans to use it as a loveseat at my upcoming wedding I’m really looking forward to getting stuck into it! I’ll be sure to update along the way.

Auction Watch # 20 – 1960’s Swivel Lounge Chair

July 20, 2015Auction Watch1960's, Auction Watch, ChairJohnny

Tonight I open auction watch # 20 with a well known phrase – Credit given where credit is due.

What do I mean by that you may ask? See below…..

How amazingly good is the main picture for the auction listing of a 1960’s swivel lounge chair!?! The way the sunlight is pouring through (I’d imagine a window) onto the backrest whilst creating subtle shadows and differing tones of colour on the rest of the chair is a real treat to look at. This image alone makes me want to be its new owner!

Of course there’s the great shape and design of the chair, along with the current bid – only being $71!

To find, search eBay for 1960s Swivel Lounge Chair, but be quick, there is just under 24 hours to go!

The Right Shade

July 2, 2015GeneralLamp, Mid Century, Rocket, Teak, TealJohnny

I’ve owned this great mid century teak ‘rocket style’ lamp for a little while now, and it has always donned the cream, coolie lamp shade. Although reasonable in style, it just never felt quite right.

Mid Century Teak Lamp — Ready for take off!

With the 3 legged tripod base, and the narrow, tapering central column the wide based coolie shade was a little top heavy. How much though I never realised until just recently when I came across this fantastic, original teal and gold drum style lamp shade.

With the teal shade firmly in my possession I was keen to try it out on the rocket lamp and see how it looked. I was super impressed not only with how well the teal contrasted against the teak, but also in it’s proportions. The drum style shade seems to suit the lamp perfectly, and allows the overall flow to continue on up, compared to the coolie style shade which I feel halted the flow – the shape – the design of the original lamp!

Now residing in our lounge room, with the teal shade firmly atop, the teak rocket style lamp will soon be joined by another teal coloured item. Possibly my favourite piece. Blog post and images to come!

Mystery Solved – Fler Tub Lounge – Flerbelle

June 16, 2015Auction WatchAustralian, Fler, Lounge, Retro, SuiteJohnny

Following on from here and here, you can see I was a little stuck on finding out any more information on a Fler lounge suite I currently have in my possession. Well, that was last week! Fast forward to tonight and thanks to Dean from Melbourne we have now solved the mystery.

Dean got in contact via the contact page and advised that he has the identical lounge suite, in the original, awesome lime green upholstery.

Retro Lounge suite - Australian — Original, Lime green Fler ‘flerbelle’ lounge suite.

Turns out that Dean’s parents brought the lounge suite new, and today it still looks just as good as it did when it came off the showroom floor. I asked how comfortable the lounge suite is, as I know for me it was possibly the most comfortable lounge chair I’ve ever sat it. He replied –

Yes, the single-seater tub chairs, when you sit sideways in them with your legs draped over 1 side, are just like sitting in a cloud!

So you may be asking now how have we identified the lounge suite? All we’ve got is an identical suite, with no real other markings or labels, right? Wrong!

Well, you see, as it turns out Dean’s parents also kept the original sales brochure! And he was good enough to send through some images of it also!

1960's/70's Fler Lounge Catalogue — Flerbelle – In all it’s original glory!

Prices for an original Fler Lounge Suite — Original Fler Catalogue with pricing!

So there we have it, Flerbelle – consisting of a single moulding of strong rigid polyurethane covered with soft foam.

How great is the original brochure – dimensions, original pricing, original showroom image! Super cool!

Again I must thank Dean J, from Melbourne for identifying my unidentified Fler lounge suite, without his time and effort to get in contact and send through the above images who knows how long I’d be searching the interwebs for! Hopefully it may help out others in the future with their quest for knowledge also.

As it turns out that Dean is moving apartments shortly, and unfortunately the Fler suite won’t fit and he will be looking to find a new home for it. So if you’re in the market for a 1 owner, original Fler Flerbelle 3 piece lounge suite in excellent condition with the original sales brochure, be sure to get in contact and I’ll pass on your details.