As soon as I saw this listing, the first thing that came to mind was a sunken lounge room!
The first thought came into yours was ‘here he goes with his big lounge fetish again’…..
But seriously though, can you blame me? How cool is this monstrosity of a lounge! Apparently it originated from the Mahogany room in Crown Casino – that might help explain it’s brown velour upholstery……..
So what are you waiting for? Buy now, build your lounge room around it later and then invite around 13 of your friends and converse the night away!
To find, search eBay for – Large RETRO modular couch. But be quick, ending tomorrow PM with a starting price of $150!
I’m really impressed with this corner lounge by Van Treight on eBay this week.
Consisting of 2 lounges (2 & 3 seater) which are joined in the corner by a nice matching coffee table it has a really nice shape – I love the sloping angles on the back rest/front of the arm rest. I’ve seen various pieces of Van Treight furniture in my time, and I must say that the quality is really, really high.
The same seller also has listed 2 single, matching arm chairs – one has a footstool. I think this presents as a nice opportunity to purchase quite a reasonable sized setting, all in one go!
With a good oiling and some fresh upholstery, I think you’d certainly be onto a winner here!
So what’s the current bid? Well with all 3 auctions ending in 3 day, we have the –
Corner lounge suite and coffee table @ $51
High back arm chair @ $86
Low back arm chair with foot stool @ $87
Definitely one to keep an eye on. To find – Just search eBay for – Van Treight Viking Series
I don’t know what it is about them, but I’ve definitely for a thing for big lounges. Perhaps its the ‘look at me, I can seat 5+ people at once’ attitude that they give off, or the idea of the room it would be in and how it would be furnished that I’m attracted too, but regardless, I find them really, really cool.
So it’s no surprise that I was impressed by this awesome corner lounge and two matching lounge chairs on eBay this week.
In the right space, I think that it would look amazing! And all for the reasonable (starting price) of only $400!
To find search eBay for – ORIGINAL VINTAGE RETRO CIRCA 1960 VINYL CURVED 3 PIECE LOUNGE SUITE MID-CENTURY.
Be sure to have some strong men at your disposal and large double doors into your living/lounge room to save any heart (and back) ache! Until next time.
I thought the best way to start off 2016 on the blog (a little late…….yes I know) would be to wrap up the Kafka lounge blog posts that I started last year in the lead up to our wedding – you can find them here.
In my last post I left with you with the finishing touches in preparation to use the lounge as a ‘love seat’ on the amazingly white sands of Jervis Bay.
So how did it all turn out you may ask? Excellent! See below!
Now it wouldn’t be fair If I didn’t show off my beautiful bride on the day…………..
It was amazing to see the concept that I had pictured for all those months leading up to the wedding be captured on film by our wonderfully talented photographer – Pete, from Peter Izzard Photography. I cannot recommend him enough! You can find out more about his services here – http://www.peterizzardphotography.com.au/
Sorry for the length of time between posts! Unfortunately time got a little short before my wedding, and thus the updates on the Kafka lounge have had to wait, however I was able to complete the freshen up before the big day, and use it exactly how I had planned!
I left you with the hand rests sanded, and ready for the finish to be applied. As they are firmly attached, removing wasn’t an option, so to prevent any of the finish getting on that majestic coloured vinyl, good old masking tape was used. Fiddly, however once on I didn’t have to be too concerned about any spillage or runs staining the vinyl!
Once done, the finish was ready to be applied. In my very first post about the lounge I mentioned the different timbers used and how matching hand rests to the darker teak legs may be a little difficult. To try and darken the coachwood (hand rests) I experimented with a few different stains, and applications, and eventually settled on a mixture of 10:1 – being 10 parts danish oil to 1 part teak stain. Mixed together and applied with a soft, cotton cloth I was extremely happy with the results after 4 coats were applied. It really highlighted that grain in the left hand side hand rest!
With all the timber work now complete, all that was left was to fit the cheesecloth to the underside to cover up the ‘internals’, refit the timber legs and give the lounge a quick wipe over once more with the vinyl conditioner!
So how did it turn out…………? Guess you’ll have to wait until next time to see! 🙂
All pretty self explanatory! From the top left we have a comparison between a sanded teak leg to one with the original finish which I’ll use a guide for when it comes ‘colour matching’. Working clockwise we then have all 4 legs sanded. Due to only wanting to remove the original finish I didn’t have to go to harsh with the sandpaper. 240 grit was plenty enough to remove it, and then finish with a 400 grit which gave a great, super smooth finish.
Bottom left shows all 4 legs in my jig to apply the danish oil finish. This was after 1 coat, notice the matt finish, and how it will change to a higher gloss/sheen when more coats are applied. Also of note are the 2 distinctive shades of colour between the legs, with the longer legs (front) being darker. Bottom right shows the completed legs with 4 coats of Danish Oil applied. Very happy with the end result!
With the legs now done and dusted, my attention turned indoors, and to the well worn hand rests. To remove what was left of the original shellac finish I used a cabinet style scraper. What you see above is the completed works.
With a steady hand and some 240 grit sandpaper I got to work being ever so careful to avoid the vinyl upholstery. An hour later and a few sheets less of sandpaper and I was done. I was super impressed with the grain on the left side hand rest. I couldn’t see it before through the shellac, but it’s looking like there’s a bit of fiddleback in there. Will be great to see how it shows up under the Danish Oil! A quick hit with some 400 grit to wrap things up and we’re just about ready to apply the new finish.
I’ll be moving reasonably quickly through the freshen up of the Kafka lounge, largely due to a major deadline looming (read wedding) in the next few weeks – I’m also a little ahead of where I’m posting about.
So following on from the original clean, removing of stray paint and applying a conditioner to the vinyl we have now landed at the scratches and small tears to the original vinyl upholstery. The main one of note, is a small tear, approximately 15-20mm long x 2 – 3mm wide in the centre of the main cushion. What to do?
I did investigate the possibility of recovering the cushion, however to match the original colour and pattern of the vinyl was proving to be a difficult task, and to be honest probably more trouble than it was worth, so the decision was made to leave it as it, and just tidy up a few of the smaller nicks and scratches with some specific vinyl adhesive to stop them catching and going any further.
Once the adhesive was dry, I then moved onto removing the angular, tapered teak legs in preparation for refinishing. The legs were simply screwed into a threaded nut that ‘bites’ into the other side of the timber. Simple, yet effective.
With the legs removed I was faced with the dirty, well worn calico/cheesecloth cover to the underside of the lounge.
I had always been in two minds in regards to replacing it. Looking back now I wonder how that thought could of ever entered my mind! Being a little tired made for lite work in removing the bottom cover. With 60 years of dust settled on it, I also discovered that originally it looks like it was light blue in colour, perhaps to blend just that little better. With the replacement I don’t think I’ll worry with the colour, just a nice clean piece of calico/cheesecloth to cover the ‘internals’ of the lounge, which by the way are in great shape for their age! No sagging springs or visible damage. Score.
With the underside of the lounge now accessible, and a heap of old rusty staples looking at me square in the face (used to fix the calico cover) I got to work removing them all, one at a time. Not really necessary, and a lot of guys would just cover over the top, however my slightly obsessive compulsive nature wouldn’t let me do it. Much better in the long run I think.
Quick thing to note – It appears the slight angle on the front legs were achieved by using a small piece of masonite under the rear side of the front leg(s). Interesting.
So I’m getting married in just over a month, and my fiancee and I decided that – weather permitting, we would use this great teal/turquoise coloured 2 seater lounge designed and manufactured by Kafka as our ‘love seat’.
Being used solidly for the past 60 years has taken its toll (although small) on the lounge which is a little tired. Whats that mean? Well with time ticking away it’s time for a restoration, or perhaps more fitting, a ‘freshen up’.
First of all comes a good vacuum, especially down behind the attached seat cushion. Although a little tight to get into, plenty of dirt and dust was removed. Then, and perhaps the most notable part – washing the vinyl covering. Nothing other than some warm water, soap, and a soft sponge produced the amazing result you see in the top 2 images (left half after – right half before).
It’s crazy to think that that much dirt, grease and grime was there. The other side affect from giving the vinyl a thorough clean, was the overall feel. Before washing, the vinyl was hard to touch and stiff, yet after the wash it felt super soft and nice to touch again. It definitely revitalised the vinyl, and with a vinyl conditioner applied once dry, it will only continue to get better!
Next was the stray white paint brush mark! With the vinyl having a very fine textured pattern, I didn’t want to use anything abrasive to try and remove the paint in the grooves, so I ended up using a super fine sewing pin to very gentle pick the white paint out of the grooves. Super time consuming, however it worked quite well!
As you can see from the above picture, the timber hand rests have seen better days. The tinted shellac has started to flake off in places (like most shellac finished from the era) while the angular legs are looking a little tired.
The combination of timbers here are interesting. The hand supports are manufactured out of coachwood, whilst the legs are teak. Coachwood is naturally a lighter coloured timber, hence why a darker/tinted shellac was used as the finish – to try and match the darker, solid teak legs. May pose some difficulties down the track but we’ll cross that bridge in time!
I was lucky enough to come across this 2 seater lounge whilst on holidays. Looking quite familiar and with that amazing teal coloured vinyl I made it mine as quickly as I could!
The lounge appears to of been manufactured by Paul Kafka (I have done a post on him recently here) and although there are no visible maker’s labels or stamp, the styling is quite distinct and easy to identify with the angled legs, flared armrests, timber inserts (hand rests) and buttoned/stitched rear back support.
Overall the condition of the lounge is reasonable to good. There are a few nicks and one minor tear to the vinyl (also needs a thorough clean), the timber hand rests and legs need refinishing and the cheesecloth cover to the underside needs replacing and over the next few weeks I will be completing each as required.
With plans to use it as a loveseat at my upcoming wedding I’m really looking forward to getting stuck into it! I’ll be sure to update along the way.